TTS India Instruments – Manufacturer of IR Lab Dyeing Machine, Fabric Tensile Testing Machine, Drape Meter, Magnetic Hot Plate Stirrer and Testing & Measuring types of equipment in Coimbatore, Tamil Nadu
TTS India- Instruments
TTS INDIA INSTRUMENTS
FIBER TESTING INSTRUMENTS
It provides information about the physical or structural, chemical and performance properties of the fabrics.
BEAR SORTER ASTM D1440 / 1447 ISO 920 BS 4044 IS 233
A conventional instrument for testing the fiber length.
Easy to extract and obtain 2.5% 50% SL with short fiber content.
HAND OPERATED WRAP BLOCK
Silver and roving reel, hand-operated, to determine the linear density (count) of silver & roving.
Length & Indication in battery-operated Counter.
Available model to Accommodate 14" & 18" lift bobbin.
Available models: Yards & Meters
ELECTRONIC TRASH ANALYSER (ASTM D 2812 & ITMF)
Determine the percentage of trash, lint, and Dust content within a sample of raw cotton, blow room lap.
Suitable for 50/100 grams of cotton samples
Operating under the principle of buoyancy separation by the use of air currents.
Separate suction system for effective separation of lint and now — lint contents.
Compact aerodynamic shape silent operation and nonpolluting nature for better laboratory Environment.
Maintenance-free for suction kit no need of carbon brush replacement.
FIBER BUNDLE STRENGTH TESTER ASTM D1445 / 2524, BS 5116, IS 3675 & ISO 3060 (STELOMETER)
Determine the tensile strength or breaking tenacity and elongation (at break) of the flat fiber bundle.
Accurate measurement of force and elongation at break of a flat fiber bundle with zero or 1/8” (3.2 mm) clamp space.
Tabletop model; the constant rate of loading (CRL) principle; specially designed for ergonomic comfort.
Precise pendulum mechanism simultaneous determination of strength and elongation.
Assorted accessories including torque vice for easy preparation and testing of the sample.
Strength (breaking force) is measured from 2.0 to 7.0 kilograms and the elongation range ts up to 50%.
MOISTURE TESTER ASTM D2654
Electronic moisture meter to determine the moisture content percentage of fiber, yarn, and fabric, natural synthetics and blends supplied with 3 probes for fiber, yarn, and fabric ( Battery operated )
ELECTRONIC WRAP BLOCK
Advance bed type instrument for preparing the silver and roving sample.
Soft-start and soft-stop ensure stretch-free sampling.
Provision to select preset Imperial & Matric lengths for hank measurements.
Manual Sliding cutter for making precise edge cut (optional). Preparation of silver 3 samples at a time.
YARN TESTING INSTRUMENTS
Textile Testing is an art, technique or process of determination of different properties of textile materials
YARN EVENNESS TESTER
ISO 16549
It can test and output CV% value, U% value and twelve level faults in realtime.
It has variation-length curve, deviation ratio (DR) curve, spectrogram, linear density-frequency distribution,etc various graphic indices
It has precise continuous spectrum which is more beneficial for user to analyze textile technical fault part.
Transmission system adopts import servo system, low noise and high Reliability.
Expert system can help user analyze textile technical fault bulletin and compare with USTER to evaluate spinning level.
It can store uneven curve and supply more detailed analysis for user.
CRIMP TESTER
Determine actual yarn and bulkiness in fabrics, Latest economic design with modern esthetics, Simple operation.
Supply with a straightening tension check weight.
Available in 0.5, 1.0, and 1.5 meters range
ELECTRONIC WRAP REEL
Wrap reel Electronic to produce skeins of yarn of a predetermined length and number of turns for the count and/or strength testing.
1 meter 36" or 54" circumference, collapsible swift (specify) completed with yarn package stand.
Pretension device, fitted with a predetermined count.
WALLMOUNTED LEO STRENGTH TESTER - 500 LBS
Determine actual yarn and bulkiness in fabrics, Latest economic design with modern esthetics, Simple operation.
Supply with a straightening tension check weight.
Available in 0.5, 1.0, and 1.5 meters range
ELECTRO-CSP-TESTER
A tabletop model with a single screw rod mechanism.
Detachable micro-controller-based navigation unit for easy maintenance.
The geared motor ensures noise-free operation. e Available capacity: 750 lbs.
Note: A combined CSP system consists of Tabletop Lea Strength Tester Spin-Q Preparatory, spinning analytics, and post spinning software. Electronic Balance with 0.001g accuracy. Computer with Printer (optional supply)
WALLMOUNTED LEO STRENGTH TESTER - 500 LBS
To determine yarn twist in single or plied Yarns, quadrant type with auto stop & reverse for conventional or untwist / re-twist methods.
Test length adjustable up to 50cm / 20 inches for S & Z twist yarns.
Note: Computerized model also available. A combination of Electronic Twist Tester + Twist analysis Software Computer with Printer (optional only)
YARN APPEARANCE BOARD WINDER
To assess the evenness harness, neps and other imperfections in a representative sample of yarn wound at a predetermined pitch onto a tapered blackboard.
Variable pitch traverse 8 -19 wraps per Inch, variable winding speed drive, with yarn package stand.
The geared motor ensures noise-free operation. e Available capacity: 750 lbs.
Assessment against photographic comparison standards (Not Included)
SINGLE YARN STRENGTH TESTER
Semi automatic instrument - I lanual sample feeding.
Capacity 50 N
Elongation range upto 1000%
Two modes for test start - Hand sensor and Push button.
Work on CRE principle.
Mesuremt of Single Yar Strength, RKM & Elongation.
Test speed 50-5000 mm/min.
Test length 100-500mm.
Auto pre-tension depending on count selected.
Numerical Results - Breaking Force, Breaking Elongation, Breaking Tenacity, time to Break, Work done.
Graphical resutls - Force Elongation Curve, Storke Diagram, Frequency Distribtion Curve.
FABRIC TESTING MACHINES
Fiber testing tools lead the industry in helping technicians ensure best practices for handling fiber in every situation
CREASE TESTER
AATCC 66 ISO 2313 IS 468J BS EN 223J 3
Determination of recovery properties of fabrics against creasing.
Accessories are provided to complete the test quicker.
STIFFNESS TESTER
ASTM D4032/1388 BS 3356 IS6490
Determination of stiffness properties like bending length and flexural rigidity of fabric.
ELECTRO PITTING
IS J 097J DIN 53865 BS EN ISO J 2945-J IWTO 40-88
Determination of the pitting resistance of fabric by ICI method.
Accessories are provided to complete the test simpler as per standards.
Aviable Nlodel: 2 box pitting and 4 box pitting.
Optional Supply
Pitting photographic standards for woven/knitted separately.
ABRASION & PITTING TESTER
ASTM D4966/ 4970 IS 1 2673 DIN 53863 BS EN ISO12947-1
Nlartindale abrasion and pitting tester. To determine the abrasion and pitting resistance of all kinds of textile structures.
Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pitting is compared against standard parameters
The unique design allows the removal of individual sample holders for examination without lifting the top motion plate provided with a unique programmer.
ELECTRO BURST
ASTM D3786 EN IOS J 3938-J ISO 2758 / 2759 3689 BS 3424 / 3J37 IS1966
Measurement of bursting strength of knitted, woven, paper boards as well as carton box etc.
Capacity 0.5 to 100 kg/cm
ELECTRO CROCK METER
AATCC 8 / J 65, BS EN105X12
Determination of color fastness of textile against rubbing under wet or dry condition
Extended testing provision of dyed yarn bundle, carpets and floor coverings.
WASHING FASTNESS TESTER
AATCC 2/3 / 28 / 6J / 86 /J 32 / ISO 105 COJ -06 ISI ISO 105-0J 0
Washing colorfastness tester, for conducting wash fastness test, dyeing, and dry cleaning test and colorfastness to detergency and other tests.
Rotation speed is 40 rpm, water temperature is up 95°C max. capacity is to hold 8 containers of 550 ml or 1200 mlof8 containers.
Digital temperature controller and digital timers are easy operations and accurate control. safety devices: Door safety swift switch, over-temperature protection and low water level protection.
IR Lab Dyer
Infra Colour is environmentally friendly. easy to use tabletop model Sample Dyeing N!achine. IR Radiation heating enables efficient heating of breakers with minimal energy consumption resulting in optimum dyeing conditions. without contamination of beakers with messy heating medium & hence the working is cleaner. There will be no pollution, no smoke or bad smell in the working area as is the case with conventional baths.
N!ore dyeing cycles are possible with Infra Colour as preparation & cleaning time is greatly reduced.
Injection Dosing System‘ is provided for making time to time additions to the beakers without opening the beaker. (For Beakers of volume 150ml S- series and above).
Control the temperature within the resolution of0.1C.
FLAMMABILITY TESTER
ASTM DJ 230 6413 BS 31 J 9 ISJ 187J
To determine the burning characteristic of textile under controlled conditions.
Stainless stell test cabinet with plass observation panel provided with automatic timing of flame spread in0.1 second increments from the ignition.
• Automatic or manual flame impingement for 1, 5 or 20 sconds NOTE : VERTICAL FLAMLIABILITY CHAMBER ALSO AVAIABLE .
PRINTING FABRIC DURABILITY TESTER
Garment & Printed Fabric Durability Tester, to determine the durability of garments and garment components, print durability, pleat retention, waddings and quilted waddings, cockling (differential shrinkage), flock retention, crinkle, seersucker and collars and cuffs. Garment & Printed Fabric Durability Tester complies with M & S P5, P6, P7, M & S C15, etc
Rotation speed: 560rpm +/-2%
Detergent: 40L
Sample size: 500 x 500 mm
Test temp: 60 +/-°C
GSM CUTTER
ASTM D2646 / 3776, IS 1964 BS EN J 21 27
Prepare circular specimens for determining the fabric yield in g/m 2 (GSM) accurately.
Suitable for woven, Non-woven and knitted fabrics.
Ergonomically design with modern aesthetic. Manually operated, fixed diameter, monobody aluminum alloy structure with controlledmass.
Quadrangle blade mechanism for rapid and accurate cutting.
Suitable for cutting any type of material including film, form, carpet, paper and leather.
FABRIC TENSILE TESTER
Fabric Tensile Tester is a new generation of the tester with innovative design, convenient using, excellent performance, and pleasing appearance, this tester is specially designed in testing textile.
Working pattern: CRE principle, controlled by large LCD, equipped with an online interface, can be also controlled by computer with professional textile software, real-time display graphs, breaking load, elongation, with PC powerful analysis system.
Adopt imported sensor from American Tedea AC servo drive, ball screw, to do a wide range speed setting. Suitable for all kinds of material mechanical performance testing According to the customer need to provide a variety of standard test functions can also be customized according to customer requirements.
Different clamps can perform different tests perfectly. All testing results and graphs can be output into Excel and be printed accordingly. With the protective function of overload, over current, over-voltage, displacement upper and lower limitation also with emergency stop. !multi Unit is a selectable force in CN, N, Lbs, Kgf, Elongation; mm, Inch & percentage.
FABRIC YARN COUNT TESTER
ASTM D2260 / 3776 ISO 721 1 BS ISO 72 J 1 -5
Estimation fo linear density of the yarn from a small piece of fabric.
Instrument fitted in an air-free cabinet with hooks and template.
SNAP PULL TESTER
ASTM M D 4846.
Determine the holding or breaking strength of prong -ring attached snap fasteners onto garments
Durable design: Natural operation, Stainless steel grips construction for accuracy, latest engineering components for the easy and maintenance-free
Results are readout from the calibrated analog dial used for testing the vertical orientation tension of button and added touch
Unit of measurement: kilogram and pounds
DIGI OVEN
Used to dry and remove of moisture from any textile materials.
Stainless steel inner body construction and fitted with an Electronic temperature controller.
SAMPLE DYING MACHINE
Very compact tabletop model, elegant in looks, Suited for dyeing up to temperature 140C. Can also be used for dyeing under atmospheric conditions up to 95C
The principle of moving both material and liquor continuously is used.
Easy opening & Closing of Breaker lid
Through programeable controler.
Time for direction reversal can be set from 1 minutes to 250 minutes.
Temperature resolution of0.1C.
Available Beaker Capacity:
200ml, 250mt, 500mt, l000mt, & l200mt